CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

[Workbench] I need the help regarding desing using workbench

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   March 16, 2013, 03:52
Default I need the help regarding desing using workbench
New Member
shiva kumar
Join Date: Mar 2013
Posts: 1
Rep Power: 0
sks is on a distinguished road
I am new to CFD and I use ansys work bench for modeling a simple double pipe heat exchanger. once I modelled it and meshed it it is not able to creat the required wall and shadow for the fluid. I am not sure of the modeling technique I used is correct. Please suggest me how to create double pipe HE in workbench?
sks is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
ANSYS Workbench on "Uncertified" Linux Distros hsr CFX 266 December 9, 2017 13:06
PEM Fuel cell module meshes. ICEM vs workbench aarvay FLUENT 23 August 27, 2017 15:54
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes rooftop ANSYS Meshing & Geometry 19 March 31, 2016 02:33
Block structured hexagonal mesh vs automated tetra mesh inside Workbench for CFD Chander CFX 3 November 27, 2011 17:24
Workbench Transient Omer CFX 0 January 15, 2007 15:21

All times are GMT -4. The time now is 21:32.