CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Alternative of GLUE command in ANSYS Workbench? (https://www.cfd-online.com/Forums/ansys-meshing/115237-alternative-glue-command-ansys-workbench.html)

dkx209 March 26, 2013 13:39

Alternative of GLUE command in ANSYS Workbench?
 
Like in APDL there is command called GLUE to tell the solver that bodies are actually together but remain as individual bodies. Can someone please tell me what is the alternative of GLUE command in Design Modeler or how can I glue bodies together in Workbench Design Modeler.

I've already checked the help but it gives help about GLUE of APDL and nothing about Design Modeler.

diamondx March 26, 2013 16:25

right click on the bodies you are interested in and select "form new part"

dkx209 March 26, 2013 18:32

Ali are you sure this is exactly what the GLUE is?

diamondx March 26, 2013 22:33

https://encrypted-tbn2.gstatic.com/i...HdlugebDIdKvg5

dkx209 March 27, 2013 09:46

http://cdn.memegenerator.net/instanc...0/31053745.jpg

diamondx March 27, 2013 10:52

HAHAHAHAHAHAHAHAH. nice one, mate


All times are GMT -4. The time now is 16:44.