CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] ICEM Meshing problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 2, 2013, 15:36
Smile ICEM Meshing problem
  #1
New Member
 
Vincent
Join Date: Apr 2013
Posts: 5
Rep Power: 12
drvincentip is on a distinguished road
Dear ANSYS Users,

When I go through the ICEM CFD Tutorial Manual on the section of 'Tetra/Prism Mesh Generation for an Aorta'.
In Step 3: Generating the Octree Mesh, I don't understand the rationale for measuring the smallest diameter on the aorta geometry though it is stated in the manual as it is needed for the setting of the minimum size for the mesh. I do not find any entry of the measurement (i.e. 1.5 as the example in the manual) in the subsequent steps of the meshing process.
Can any experienced ICEM user guide me through the process of this manual? I find it quite confusing and difficult.
Thanks!

Vincent
drvincentip is offline   Reply With Quote

Old   May 2, 2013, 18:31
Default
  #2
Super Moderator
 
diamondx's Avatar
 
Ghazlani M. Ali
Join Date: May 2011
Location: Tokyo, Japan
Posts: 1,385
Blog Entries: 23
Rep Power: 28
diamondx will become famous soon enough
the smallest diameter was around 1.5. the max size was set to 2 meaning it should not exceed 2...
__________________
Regards,
New to ICEM CFD, try this document --> https://goo.gl/KAOIwm
Ali
diamondx is offline   Reply With Quote

Reply

Tags
aorta, icem mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] complex 2D meshing on ICEM kassab ANSYS Meshing & Geometry 26 April 14, 2014 22:02
[ICEM] Problem with ICEM Script Meshing asal ANSYS Meshing & Geometry 2 March 23, 2013 20:11
[ICEM] ICEM meshing problem xyq102296 ANSYS Meshing & Geometry 6 October 28, 2010 11:09
[ICEM] Meshing problem from ICEM CFD to Fluent cfdonlinederafa ANSYS Meshing & Geometry 2 September 21, 2010 17:16
ICEM meshing problem Forrest CFX 4 May 25, 2005 19:37


All times are GMT -4. The time now is 05:34.