CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] meshing problem (https://www.cfd-online.com/Forums/ansys-meshing/119096-meshing-problem.html)

flow_CH June 10, 2013 01:09
meshing problem
 
2 Attachment(s)
Hello.

I have a problem in meshing.
I want to mesh a face (red face) (mesh1 image), but it is not working properly (mesh2 image). You can see the gambit can't mesh the curve of face and it is meshing straight to end. I tried all of Quad and Tri, but they were not work.
How can i fix it?
please see attached images
Thanks

ghost82 June 10, 2013 04:18
Strange..can you attach an image with the shaded mode on?

flow_CH June 10, 2013 05:29
2 Attachment(s)
Thank you.
Please see attached images.

ghost82 June 10, 2013 06:02
Geometry seems correct to me...I really don't know what's happening..maybe expert Maxime has some tips..

-mAx- June 10, 2013 07:10
delete the surface, and create new ones.
Not one, but many (like a split).
Decomposing your sufaces into smaller ones should help

flow_CH June 10, 2013 07:49
thanks. i will try.


All times are GMT -4. The time now is 00:58.