CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] AutoCAD to ICEM (https://www.cfd-online.com/Forums/ansys-meshing/120392-autocad-icem.html)

feizaghaee July 5, 2013 16:28
AutoCAD to ICEM
 
hi experts.
can ICEM read the surfaces which is created in AutoCAD?
thanks in advance.

sadjad.s July 5, 2013 16:50
Answer
 
Hi mate,
Once I imported DWG file format in ICEM and it had no problem.(my experience;))

feizaghaee July 6, 2013 11:33
Quote:
Originally Posted by sadjad.s (Post 438053)
Hi mate,
Once I imported DWG file format in ICEM and it had no problem.(my experience;))
I imported DWG without surfaces it was only curves and it had no problem.
but when I created a surface in AutoCAD ICEM didn't recognized the surface and its attached curves! How did you create surfaces in AutoCAD? I created them by surface planer tool.

sadjad.s July 7, 2013 14:27
Answer
 
Hi mate,
As the mater of fact I didn't make it myself.
I just imported it and meshed it.

feizaghaee July 12, 2013 06:55
thanks a lot.


All times are GMT -4. The time now is 08:22.