CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Impeller Meshing

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By rvl565

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 7, 2013, 15:26
Default Impeller Meshing
  #1
Member
 
RacMat
Join Date: Jan 2013
Posts: 78
Rep Power: 13
rvl565 is on a distinguished road
Hi,

I am trying to mesh an impeller using ansys meshing.

Whenever I use the advanced size function: On Proximity and Curvature, it gives the following error: "A software execution error occurred inside the mesher. The process suffered an unhandled exception or ran out of usable memory."

It works fine when I use the On Curvature setting.

I plan to use the MRF method.

The geometry was imported from solidworks as two seperate objects (.sat file) and i used the design modeller to subtract the impeller from the fluid region.

The same error also occurs when I use the patch independent Tetrahedron method. The On curvature setting works only when i use the Automatic Method.

A previous post suggested that i clear the generated data before meshing again, that didnt work for me.

Thanks for you help!
Attached Images
File Type: jpg impeller.jpg (50.9 KB, 98 views)
terrykim likes this.
rvl565 is offline   Reply With Quote

Old   July 24, 2013, 04:33
Default
  #2
New Member
 
Verona
Join Date: Oct 2012
Posts: 4
Rep Power: 13
Giulio_ska is on a distinguished road
Did u find any solution? I have the same problem...

Tnx

Giulio
Giulio_ska is offline   Reply With Quote

Old   July 24, 2013, 09:02
Default
  #3
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22
vasava will become famous soon enough
Quote:
Originally Posted by rvl565 View Post
Hi,
The geometry was imported from solidworks as two seperate objects (.sat file) and i used the design modeller to subtract the impeller from the fluid region.
I did not understand this.

If you importing or meshing geometries in parts for MFR it would not work.
vasava is offline   Reply With Quote

Old   July 24, 2013, 09:16
Default
  #4
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22
vasava will become famous soon enough
The memory error could be due to the fact that your computer does not have enough memory to generate mesh for your case.

When you use Proximity and Curvature for meshing, the mesher tries to refine the mesh in the regions where higher gradients are anticipated. If you do not mention the mesh size and leave it to the mesher it take some default values. The mesher will then try to refine your local mesh as much as possible. Now this may be useless and unnecessary. Sometimes to achieve a higher order of refinement the mesher has to spend very long time for refinement.
vasava is offline   Reply With Quote

Old   July 24, 2013, 14:24
Default
  #5
Member
 
RacMat
Join Date: Jan 2013
Posts: 78
Rep Power: 13
rvl565 is on a distinguished road
Thanks for answering. you were right, my computer didn't have enough memory, i have solved the problem now.
Why would importing geometries in parts not work?
I had 3 parts, impeller, impeller fluid and the casing.
I subtracted the impeller from the impeller fluid and made an interface between the casing and the impeller fluid region. Is this wrong?
I have a thread regarding this http://www.cfd-online.com/Forums/flu...eneration.html
is this approach wrong ( the last post )?
rvl565 is offline   Reply With Quote

Old   July 25, 2013, 02:34
Default
  #6
Senior Member
 
Paritosh Vasava
Join Date: Oct 2012
Location: Lappeenranta, Finland
Posts: 732
Rep Power: 22
vasava will become famous soon enough
Your approach is right. I meant that if you import geometries one-by-one it wont work.

Anyways its good that its working now.

Last edited by vasava; July 30, 2013 at 02:08.
vasava is offline   Reply With Quote

Old   July 29, 2013, 17:20
Default
  #7
Member
 
RacMat
Join Date: Jan 2013
Posts: 78
Rep Power: 13
rvl565 is on a distinguished road
Thanks for the answers!
rvl565 is offline   Reply With Quote

Reply

Tags
advanced size function, design modeler, impeller

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Meshing Centrifugal Impeller Bellmo ANSYS Meshing & Geometry 8 November 27, 2018 14:02
[ICEM] Hexa meshing of impeller and diffuser assembly Nitin Dewangan ANSYS Meshing & Geometry 14 September 13, 2016 10:41
how to start for modelling n meshing a mixing tank with impeller jeevan ANSYS Meshing & Geometry 9 July 16, 2013 08:06
Dynamic meshing of impeller using fluent shadyenany FLUENT 6 September 22, 2011 17:56
[ICEM] Meshing a centrifugal compressor impeller Mitpostdoc ANSYS Meshing & Geometry 8 February 25, 2011 11:51


All times are GMT -4. The time now is 07:53.