[ICEM] ICEM Newcommer Cheat Sheet

FreeFall79 · November 18, 2013, 14:12

Hi Community,

I was hoping to make a new user quick cheat sheet for tackling commonly faced problems. I have reviewed the documentaion in the read first sticky but I think there is room for another post which has quick fixes for us new users so the old guard does not have to repeat themselves.

Example

Dealing with penetrating Elements....Merge Nodes is great for this. I will try and add an example with pics. This is not evident in the manual or any of the tutorials.

Another one is check geometry, I use it for a grabing yellows and deleting them but there are probably better uses.

IF an effective cheat sheet is made that would cut down on the more basic questions that I and others like me to post on this forum.

siw · November 19, 2013, 02:25

Just to add to this thread the link to PSYMN's ICEM presentation, see post #16 in: http://www.cfd-online.com/Forums/ans...eneration.html. Very useful for new users. A read of this would save lots of people making new threads.

November 18, 2013, 14:12	ICEM Newcommer Cheat Sheet	#1
FreeFall79 Member Matthew Rich Join Date: Jul 2013 Posts: 33 Rep Power: 12	Hi Community, I was hoping to make a new user quick cheat sheet for tackling commonly faced problems. I have reviewed the documentaion in the read first sticky but I think there is room for another post which has quick fixes for us new users so the old guard does not have to repeat themselves. Example Dealing with penetrating Elements....Merge Nodes is great for this. I will try and add an example with pics. This is not evident in the manual or any of the tutorials. Another one is check geometry, I use it for a grabing yellows and deleting them but there are probably better uses. IF an effective cheat sheet is made that would cut down on the more basic questions that I and others like me to post on this forum. Far likes this. Last edited by FreeFall79; November 18, 2013 at 16:40.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Workbench 13: Structured Hexa Meshes	rooftop	ANSYS Meshing & Geometry	19	March 31, 2016 02:33
[ICEM] Different meshes from ICEM and GAMBIT	Mojtaba.a	ANSYS Meshing & Geometry	9	March 30, 2013 02:42
[ICEM] Meshing adjacent wall geometry and simple ICEM questions	everdimension	ANSYS Meshing & Geometry	25	June 20, 2012 04:25
Design Modeler to ICEM.....	Joe	CFX	0	January 24, 2008 03:39
help in galvanising sheet problem	MANOJ	FLUENT	8	August 22, 2005 02:29

November 19, 2013, 02:25		#2
siw Senior Member Stuart Join Date: Jul 2009 Location: Portsmouth, England Posts: 733 Rep Power: 25	Just to add to this thread the link to PSYMN's ICEM presentation, see post #16 in: http://www.cfd-online.com/Forums/ans...eneration.html. Very useful for new users. A read of this would save lots of people making new threads.