[Daniel_Khazaei]

Hi guys


I am trying to import a geometry from a coordinate file. The geometry is attached and the curve equation is:

y = A*sin(x/(L*b))

L=30 cm, A=0.002 and b=0.25

also I have attached the coordinate file that I have created so far based on the above equation.

The problem is when I import the data file into ICEM, nothing happens. So i think something is wrong with data file. The coordinate file is also attached.

I have tried an airfoil coordinate file and it worked.


any help would be appreciated.

regards

[hussain_2723]

your formate of the file you want to upload is not the right one try to use the following formate in the JPG bellow.Capture.JPG

[Daniel_Khazaei]

Originally Posted by hussain_2723

your formate of the file you want to upload is not the right one try to use the following formate in the JPG bellow.Attachment 27235

well I have found a workaround for my problem. I have imported my coordinate file into the design Modeler by 3D curve feature. In design Modeler I have created my geometry. Then I have used the geometry in ICEM.


thanks for the answer.


regards