[ICEM] Mesh Smoothing problem

star · August 19, 2013, 06:57

Hi friends. I generate quad mesh around 2D airfoil. I got some problem regarding "Smooth hexahedral Mesh-Orthogonal". After some settings When i click Apply it gives me some error i.e "can't read 'fixGeo': no such variable".
I tried a few times with different settings but this smoothing option is not working. Any one has any idea about this option. why it is showing me this error? Thanks in advance

xcboxer · December 20, 2013, 14:01

All,

I am facing the same exact issue when I try to smooth a simple 2D periodic channel grid. I am not an icemcfd expert, but here is a brief summary of what I did before encountering this issue:

Make necessary points and lines.
Defined parts out of the lines: inflow, outflow, top, bottom.
Made a block with 2D planar option.
Formed the mesh with pre-mesh params.
Computed the pre-mesh.
Converted the mesh to unstructured (right-click Blocking->Pre-Mesh->Convert to Unstruct Mesh).
Went to edit mesh and Smooth Hexahedral Mesh Orthogonal.
No matter what options I select, I get the error mentioned above.

Has anybody else encountered this. Does anybody know how to get around this?

Far · December 21, 2013, 03:15

Orthogonal mesh smoother is improved in V15. Before v15, I think orthogonal smoother for hexahederal meshes was recommended at all...

August 19, 2013, 06:57	Mesh Smoothing problem	#1
star Member Harry Join Date: May 2013 Posts: 68 Rep Power: 12	Hi friends. I generate quad mesh around 2D airfoil. I got some problem regarding "Smooth hexahedral Mesh-Orthogonal". After some settings When i click Apply it gives me some error i.e "can't read 'fixGeo': no such variable". I tried a few times with different settings but this smoothing option is not working. Any one has any idea about this option. why it is showing me this error? Thanks in advance

December 20, 2013, 14:01	Similar problem with 2D channel grid	#2
xcboxer New Member Buzz Clay Join Date: Dec 2013 Posts: 1 Rep Power: 0	All, I am facing the same exact issue when I try to smooth a simple 2D periodic channel grid. I am not an icemcfd expert, but here is a brief summary of what I did before encountering this issue: Make necessary points and lines. Defined parts out of the lines: inflow, outflow, top, bottom. Made a block with 2D planar option. Formed the mesh with pre-mesh params. Computed the pre-mesh. Converted the mesh to unstructured (right-click Blocking->Pre-Mesh->Convert to Unstruct Mesh). Went to edit mesh and Smooth Hexahedral Mesh Orthogonal. No matter what options I select, I get the error mentioned above. Has anybody else encountered this. Does anybody know how to get around this?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
[ICEM] Volume mesh smoothing problem -DLR F6	Far	ANSYS Meshing & Geometry	5	April 23, 2012 06:31
ICEM Tetra mesh, Size reduction and Skewness problem	Catthan	ANSYS Meshing & Geometry	6	December 5, 2010 19:39
[snappyHexMesh] external flow with snappyHexMesh	chelvistero	OpenFOAM Meshing & Mesh Conversion	11	January 15, 2010 19:43
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

December 21, 2013, 03:15		#3
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	Orthogonal mesh smoother is improved in V15. Before v15, I think orthogonal smoother for hexahederal meshes was recommended at all...