[ANSYS Meshing] Hydrocyclone meshing in ICEM CFD

k1k · January 2, 2014, 00:24

Hi,

I am using ICEM CFD for hydrocyclone meshing. i have almost done the meshing but there is some issue with the "Uncovered Faces "which is i don't know how to solve. Actually the main problem is block connectivity which is not correct. I don't know how to connect different blocks together, which have different node no. i tried but didn't work ....

can any one help me regarding this issue???????

Thanks in advance....[

k1k · January 2, 2014, 00:29

Far · January 2, 2014, 08:30

You can join blocks with merge block command or merge vertex command. But i would recommend that you start with single block and cut it into the required shape...

k1k · January 2, 2014, 09:13

Hi Far
Thanks for ur reply......

I have tried join blocks with merge block option, it says blocks are unstructured so it is not possible to join. even i tried with merge vortex option also which is also not helpful because it won't covered the face which i mentioned in image 4...
i didn't try with single block so I ll give try with single block.

Thanks for ur suggestion .....Far

Far · January 2, 2014, 12:41

can you show the blocks where you have tried merge command and any message you got ?

k1k · January 3, 2014, 01:26

Hi Far,
i extrude block 3 from block 1 & tried to merge block 2 & block 3.
when i tried to merge block 2 & 3, it says " Unstructured region", because no. of nodes of block 2& 3 are different that why it's not merging. ....

January 2, 2014, 00:24	Hydrocyclone meshing in ICEM CFD	#1
k1k Member kedar Join Date: Sep 2011 Posts: 33 Rep Power: 14	Hi, I am using ICEM CFD for hydrocyclone meshing. i have almost done the meshing but there is some issue with the "Uncovered Faces "which is i don't know how to solve. Actually the main problem is block connectivity which is not correct. I don't know how to connect different blocks together, which have different node no. i tried but didn't work .... can any one help me regarding this issue??????? Thanks in advance....[ Last edited by Far; January 2, 2014 at 08:27. Reason: Adjusting images in post :)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
icem cfd meshing problem	timothi61	ANSYS	2	July 16, 2013 14:22
[ICEM] problem with meshing in icem cfd	saurabhjoshi2011	ANSYS Meshing & Geometry	13	March 12, 2013 11:27
[Other] Ansys Meshing vs Ansys ICEM CFD	JuPa	ANSYS Meshing & Geometry	5	September 19, 2012 09:48
[ICEM] Problems with meshing in ICEM CFD	Benne	ANSYS Meshing & Geometry	2	September 17, 2012 03:08
[ICEM] Helicopter meshing tutorial - ICEM CFD	Far	ANSYS Meshing & Geometry	0	May 20, 2012 11:10

January 2, 2014, 00:29		#2
k1k Member kedar Join Date: Sep 2011 Posts: 33 Rep Power: 14

January 2, 2014, 08:30		#3
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	You can join blocks with merge block command or merge vertex command. But i would recommend that you start with single block and cut it into the required shape...

January 2, 2014, 09:13		#4
k1k Member kedar Join Date: Sep 2011 Posts: 33 Rep Power: 14	Hi Far Thanks for ur reply...... I have tried join blocks with merge block option, it says blocks are unstructured so it is not possible to join. even i tried with merge vortex option also which is also not helpful because it won't covered the face which i mentioned in image 4... i didn't try with single block so I ll give try with single block. Thanks for ur suggestion .....Far

January 2, 2014, 12:41		#5
Far Super Moderator Sijal Join Date: Mar 2009 Location: Islamabad Posts: 4,553 Blog Entries: 6 Rep Power: 54	can you show the blocks where you have tried merge command and any message you got ?

January 3, 2014, 01:26		#6
k1k Member kedar Join Date: Sep 2011 Posts: 33 Rep Power: 14	Hi Far, i extrude block 3 from block 1 & tried to merge block 2 & block 3. when i tried to merge block 2 & 3, it says " Unstructured region", because no. of nodes of block 2& 3 are different that why it's not merging. ....