CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] split several volumes in one face. (https://www.cfd-online.com/Forums/ansys-meshing/128471-split-several-volumes-one-face.html)

yuyuxuan January 13, 2014 07:52
split several volumes in one face.
 
In the "split volumes" button, I can only select one volume, then how can I split several volumes in one face. Thanks.

-mAx- January 15, 2014 01:28
you cannot split more than one volumes in one split operation
You have to reproduce the split operation
But you could enable the "retain" option for preventing gambit to delete the surface you used for split

yuyuxuan January 16, 2014 19:51
Quote:
Originally Posted by -mAx- (Post 470091)
you cannot split more than one volumes in one split operation
You have to reproduce the split operation
But you could enable the "retain" option for preventing gambit to delete the surface you used for split
I think so, Thanks, mAx, you really helped me a lot

ebtedaei April 11, 2019 23:40
Hi, How can I select the surface for splitting the volume?

Thanks

Quote:
Originally Posted by -mAx- (Post 470091)
you cannot split more than one volumes in one split operation
You have to reproduce the split operation
But you could enable the "retain" option for preventing gambit to delete the surface you used for split

-mAx- April 12, 2019 01:18
you shoud have a fiel for selecting the surface
In the "Split With" option, choose Surface Real
But it will work only if you have a real Volume.
If your volume is virtual, then it will be more tricky
https://www.sharcnet.ca/Software/Gam...eom_volm_split


All times are GMT -4. The time now is 12:13.