|
[Sponsors] |
January 22, 2014, 02:44 |
[GAMBIT] Uniting the faces
|
#1 |
New Member
Aalisha
Join Date: Jan 2014
Posts: 18
Rep Power: 12 |
Hello Friends,
I am new to fluent. Currently I am using Gambit 2.2.30 for creating the geometry. However whenever i try to join the faces it shows an error" ACIS body" is it a open shell" Please help me to sort out the issue. |
|
January 22, 2014, 03:05 |
|
#2 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
Your volume seems to be not closed.
Enable shade Modus, and you will see
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 22, 2014, 03:17 |
|
#3 |
New Member
Aalisha
Join Date: Jan 2014
Posts: 18
Rep Power: 12 |
Is this that we can not use one edge for two faces. I think it has something related with the sharing of edges as I am trying it with various designs
|
|
January 22, 2014, 04:00 |
|
#4 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
display the volume you are trying to build
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 22, 2014, 21:58 |
|
#5 |
New Member
Aalisha
Join Date: Jan 2014
Posts: 18
Rep Power: 12 |
||
January 24, 2014, 03:32 |
|
#6 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
select the green volume, and make it invisible.
https://www.sharcnet.ca/Software/Gam...tm#gc_specdisp Then connect all surfaces and try again to stitch all the faces for building your volume.
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
January 24, 2014, 03:45 |
|
#7 |
New Member
Aalisha
Join Date: Jan 2014
Posts: 18
Rep Power: 12 |
Yes, i was not creating the top surfaces... found it and now its working. Thanks a ton.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] Add Mesh Layers doesnt work on the whole surface | Kryo | OpenFOAM Meshing & Mesh Conversion | 13 | February 17, 2022 07:34 |
[Other] Mesh Importing Problem | cuteapathy | ANSYS Meshing & Geometry | 2 | June 24, 2017 05:29 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |