[GAMBIT] mesh problem in gambit...please help

sandi20saze · February 4, 2014, 15:51

Hi
I meshed a 3d rectangular flume with a weir in it. i used in some place boundary layer mesh then edge mesh then face mesh but i have problem with volume mesh. i recieved some errors i changed the quality of my edge and face mesh but my problem didnt solve!!!!!and i realy dont khow what to do here my model that i linked below.
pleas help me
http://www.freeuploadsite.com/do.php?id=32900

-mAx- · February 5, 2014, 00:49

here is your problem.
Untitled.png

sandi20saze · February 6, 2014, 11:14

yes thank you for your atention but what can i do to solve this problem??????????????????????

-mAx- · February 7, 2014, 09:41

adapt your geometry for preventing tangential position
Or you may also try the clean up tool
https://www.sharcnet.ca/Software/Gam...p_sharp_angles

sandi20saze · February 9, 2014, 07:38

thanks your guidance helped a lot. I cutted corners and it soleved.

February 4, 2014, 15:51	mesh problem in gambit...please help	#1
sandi20saze New Member sandi Join Date: Feb 2014 Posts: 6 Rep Power: 12	Hi I meshed a 3d rectangular flume with a weir in it. i used in some place boundary layer mesh then edge mesh then face mesh but i have problem with volume mesh. i recieved some errors i changed the quality of my edge and face mesh but my problem didnt solve!!!!!and i realy dont khow what to do here my model that i linked below. pleas help me http://www.freeuploadsite.com/do.php?id=32900

February 5, 2014, 00:49		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	here is your problem. Untitled.png __________________ In memory of my friend Hervé: CFD engineer & freerider

February 7, 2014, 09:41		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	adapt your geometry for preventing tangential position Or you may also try the clean up tool https://www.sharcnet.ca/Software/Gam...p_sharp_angles __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[GAMBIT] Problem with mesh in Gambit	giuseppemerlini	ANSYS Meshing & Geometry	12	November 10, 2014 01:04
From Autocad to Gambit, what is the mesh strategy?	kkpal	ANSYS Meshing & Geometry	0	September 24, 2013 11:55
[GAMBIT] problem in 3d mesh with gambit	m5m5kh	ANSYS Meshing & Geometry	2	June 5, 2013 04:06
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
Problem for making mesh in GAMBIT	chlim	FLUENT	0	July 8, 2005 18:23

February 6, 2014, 11:14		#3
sandi20saze New Member sandi Join Date: Feb 2014 Posts: 6 Rep Power: 12	yes thank you for your atention but what can i do to solve this problem??????????????????????

February 9, 2014, 07:38		#5
sandi20saze New Member sandi Join Date: Feb 2014 Posts: 6 Rep Power: 12	thanks your guidance helped a lot. I cutted corners and it soleved.