[BladeModeler] bounding box evaluation for contours failed designmodeler

CFDvasu11 · October 13, 2017, 06:25

Hi

I am looking to design flowpath for centrifugal compressor in design modeler. I have drawn hub, shroud, inlet and outlet sketches seperately.
Then when clicking flow domain and selecting all the parts, it displays the error message upon clicking 'Generate'.

Pls help..

Bvelasquez · August 18, 2018, 23:58

Hello sir, can I solve the problem? I have the same problem

mehdizade · January 27, 2019, 07:26

I have the same problem...please help me

alsawy · March 14, 2019, 16:51

the problem was solved for me (Axial turbine) when I made the Z axis is the axis of rotation.
Just sketch in the XZ plan and make Z the axis of rotation

Carnot · March 23, 2022, 22:59

I solved the problem when I let the sketch be +X side.

bryce_yao · September 18, 2022, 23:02

Quote:

Originally Posted by Carnot

I solved the problem when I let the sketch be +X side.

yes, is very useful, i have solve this problem by this way,thank

you

August 18, 2018, 23:58		#2
Bvelasquez New Member Briam Velasquez Coila Join Date: Jul 2018 Posts: 1 Rep Power: 0	Hello sir, can I solve the problem? I have the same problem mehdizade likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Foam::error::printStack(Foam::Ostream&) with simpleFoam -parallel	U.Golling	OpenFOAM Running, Solving & CFD	52	September 23, 2023 03:35
Initial conditions for uniform flow	andreas	OpenFOAM	5	November 16, 2012 15:00
[OpenFOAM] ParaView/Parafoam error when making animation	Disco_Caine	ParaView	6	September 28, 2010 09:54
user subroutine error	CFDUSER	CFX	2	December 9, 2006 06:31
user defined function	cfduser	CFX	0	April 29, 2006 10:58

January 27, 2019, 07:26		#3
mehdizade New Member elahe mehdizade Join Date: Dec 2018 Posts: 1 Rep Power: 0	I have the same problem...please help me

March 14, 2019, 16:51		#4
alsawy New Member alsawy Join Date: Apr 2017 Posts: 5 Rep Power: 9	the problem was solved for me (Axial turbine) when I made the Z axis is the axis of rotation. Just sketch in the XZ plan and make Z the axis of rotation

March 23, 2022, 22:59		#5
Carnot New Member Seulchan Chu Join Date: Jan 2021 Posts: 3 Rep Power: 5	I solved the problem when I let the sketch be +X side.