CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Hybrid mesh in ICEM

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 13, 2014, 14:42
Smile Hybrid mesh in ICEM
  #1
Senior Member
 
mohammad
Join Date: Dec 2010
Location: UK
Posts: 245
Rep Power: 16
mohammad is on a distinguished road
Hello everybody

I need to create a hybrid mesh in ICEM...the model is 3D airfoil with synthetic jet actuator... The inner material part is indeed to the jet chamber and is completely inside the outer domain part which includes the airfoil. For my case, the inner part will be Tetra/Quad and the outer one will be meshed by blocking. To do this

1- I named different parts like airfoil, inlet, outlet, etc.


2- I created two material parts. One for the jet chamber part (IN) and one for the domain around the blade (OUT).

3- Before meshing the IN part for the jet chamber, I deactivated the the OUT part. Then I set the surface and curve properties by using the global and local mesh size under the MESH tab.

4- However, after creating the automatic mesh for the jet chamber (IN), I realized that the auto Tetra mesh is not only inside the IN part and the OUT part is also meshed.

COULD ANYONE TELL ME THE REASON???
AND HOW TO SOLVE THIS PROBLEM


Thanks

aaa.jpg
mohammad is offline   Reply With Quote

Reply

Tags
hybrid mesh in icem

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Commercial meshers] converting ICEM mesh to OpenFOAM bmikuz OpenFOAM Meshing & Mesh Conversion 9 May 10, 2016 17:47
[ICEM] Negative volume error in hybrid mesh siw ANSYS Meshing & Geometry 4 September 3, 2014 06:25
[ICEM] Hybrid mesh hexa and tetra on ICEM PeterDaniel ANSYS Meshing & Geometry 0 October 22, 2013 13:22
problem when converting mesh (made by ICEM) using fluentMeshToFoam Forrest_Lei OpenFOAM 11 October 16, 2009 07:28
ICEM 10 mesh question DAK565656 CFX 6 May 8, 2007 13:16


All times are GMT -4. The time now is 19:50.