ICEM CFD inflation (prim mesh) problem
2 Attachment(s)
Hello,
I have this geometry as i attached and trying to make inflation layer in light green area (inner part) but i received error as in attached file. What could be the reason? |
Hi!
Go to Mesh > Global Mesh Parameters > Prism Meshing Parameters. In the 'Prism element part controls' section make sure you assigned a body in 'New volume part'. If you have already, assign your desired part again. It should work then. Sebastian |
I did it already.
|
All times are GMT -4. The time now is 16:42. |