CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Automatic fluid volume extraction (https://www.cfd-online.com/Forums/ansys-meshing/142686-automatic-fluid-volume-extraction.html)

vigii October 7, 2014 06:50
Automatic fluid volume extraction
 
Hi All,

I have a 3D cad model of inlet manifold. I want to extract the fluid volume from the 3D cad model in ANSYS Designmodeler.

I know there is a way to do this . If someone have experience with this please help me out. Videos, Documents and PDF's are welcomed to resolve this issue.

Regards,
Vigii

Gweher October 8, 2014 04:45
Hello Vigii,

You can use the "Enclosure" option in DM to extract the fluid volume. For more info refer to the Enclosure help in the DM User's guide> 3D Modeling> Advanced Features and Tools> Enclosure.

Gwenael

diamondx October 8, 2014 23:46
there you go:

https://www.youtube.com/watch?v=Bb8T...UKN8ux3NVjSryg


All times are GMT -4. The time now is 10:18.