|
[Sponsors] |
[ICEM] Imported Mesh which hasn't defined surfaces |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 17, 2014, 07:48 |
Imported Mesh which hasn't defined surfaces
|
#1 |
New Member
Christoph
Join Date: May 2014
Posts: 4
Rep Power: 11 |
Hello,
i have a problem with a imported mesh for a simulation. The meshfile has the format .cgns from the programm IGG (.msh couldn't be loaded, i dont know why). The problem is that the mesh has no defined surfaces, so that i couldn't use Boundary Conditions or Interfaces in CFX Pre on this surfaces. In CFX Pre I can only choose whole blocks of the struct. mesh. First Question: Can I define surface or something like this to use Interface and Boundary Conditions on them in CFX Pre or in which other programm? My idea was to load the file in ICEM and to define there different parts, I don't know if this is working. But here is my next problem, I can't export the information from ICEM to CFX Pre. I tried different ways, but nothing worked. ps: I'm working in the workbench thanks, ckern |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Gambit problems | Althea | FLUENT | 22 | January 4, 2017 03:19 |
Star CCM Overset Mesh Error (Rotating Turbine) | thezack | Siemens | 7 | October 12, 2016 11:14 |
[ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 08:52 |
Possible Bug for Imported Mesh | Marta | OpenFOAM | 0 | October 25, 2011 09:23 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |