CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] AnsysWB,import from DesignModeler 1Part with Surface and Solid to StructureMechanical (https://www.cfd-online.com/Forums/ansys-meshing/146500-ansyswb-import-designmodeler-1part-surface-solid-structuremechanical.html)

Martinw December 30, 2014 05:29

AnsysWB,import from DesignModeler 1Part with Surface and Solid to StructureMechanical
 
Hi all,

Im using in Ansys Workbench the Transient-Structural system. In the DesignModeler I create a Surface-Body (surface from sketches) and a normal Solid-Body (extrude a sketch). I connected this 2 bodies to 1 single Part.

The Problem now is the geometry import to the Structure- Mechanical. It doesn't work to import a Surface-Body and a normal Solid-Body in 1 single Part. Structural- Mechanical imports only the normal Solid-Body and ignores the Surface-Body, without producing any warnings.

I need to have this to bodies in 1 single Part to create a mesh with node matching.

Does anybode know what the problem is?
Is it not possible to import a Surface-Body and a normal Solid-Body in 1 single Part?
Or have somebody another method to produce a mesh with node matching of 2 bodies?

Thanks a lot!
Martin


All times are GMT -4. The time now is 05:10.