CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] FlowPath & ExportPoints Addin? (https://www.cfd-online.com/Forums/ansys-meshing/147647-flowpath-exportpoints-addin.html)

Norflow January 26, 2015 10:46
FlowPath & ExportPoints Addin?
 
I recently updated to R15, and after opening a previous project DM containing FlowPath & ExportPoints features, I am prompted with the error posted below.

All of my licenses are active, Beta Options are on and the BladeEditor addin is loaded. However, I can't see the FlowPath or ExportPoints feature anymore in DM. Can anyone shed some light on this issue?

Thanks.

Norflow January 26, 2015 10:48
1 Attachment(s)
This is the error message:

Norflow January 26, 2015 11:39
Solution!
 
SOLUTION:

Tools > License Preferences ... Geometry Tab. Make sure BladeModeler is above DesignModeler in the list by using the "Move Up" button.

mahyar.m April 19, 2016 06:14
Quote:
Originally Posted by Norflow (Post 529087)
This is the error message:
I've got the same problem and I have already set the license preference accordingly (blademodeler is on the top).
Can anyone contribute to that ?


All times are GMT -4. The time now is 00:46.