CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[DesignModeler] Square enclosure inputs and outputs

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 17, 2015, 17:53
Default Square enclosure inputs and outputs
  #1
New Member
 
andy
Join Date: Feb 2015
Posts: 9
Rep Power: 4
ayoxon is on a distinguished road
I'm creating the geometry of a room with a door, window and radiator. At the moment I have extruded an area of the square enclosure and specified that as either the door, window or radiator. This is now difficult to create a mesh for. Is there a way of just selecting an area of you square enclosure and using that as the input or output? This means or i'll have to do it mesh a cube.

Also, how would you go about making the mesh more dense at the sides of the cube?
ayoxon is offline   Reply With Quote

Old   February 18, 2015, 08:41
Default
  #2
New Member
 
andy
Join Date: Feb 2015
Posts: 9
Rep Power: 4
ayoxon is on a distinguished road
I changed the extrusions from 'add material' to 'imprint faces' whcih seems to help a little bit.

Would you say this is a sufficient mesh for my design?

Bedroom 2 Mesh 1.PNG

Bedroom 2 Mesh 2.PNG
ayoxon is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
turning ouputs into inputs (urgent) yosr FLUENT 4 December 19, 2008 06:34


All times are GMT -4. The time now is 17:01.