[BladeModeler] rotating

Sof_70_Usthb · March 7, 2015, 01:28

Hello everybody,
Can somebody help me gettig a geometry file of a centrifigal compressor readable on BladeGen with the possibility of making the diffuser rotate. Or can somebody indicate me how to get a geometry file used in an article in witch the case of rotating diffuser of centrifugal compressor with experimental results has been done.
Please it's an emergency.
Sincerly.
E-mail : aas_srra70@yahoo.fr

Sof_70_Usthb · March 20, 2015, 13:59

Hello,
Can somebody help me gettig a geometry file of a centrifigal compressor readable on BladeGen with the possibility of making the diffuser rotate.
Sincerly.
E-mail : aas_srra@yahoo.fr

March 7, 2015, 01:28	rotating	#1
Sof_70_Usthb New Member AyAhSof Join Date: Jun 2009 Posts: 8 Rep Power: 16	Hello everybody, Can somebody help me gettig a geometry file of a centrifigal compressor readable on BladeGen with the possibility of making the diffuser rotate. Or can somebody indicate me how to get a geometry file used in an article in witch the case of rotating diffuser of centrifugal compressor with experimental results has been done. Please it's an emergency. Sincerly. E-mail : aas_srra70@yahoo.fr

March 20, 2015, 13:59	Rotating diffuser	#2
Sof_70_Usthb New Member AyAhSof Join Date: Jun 2009 Posts: 8 Rep Power: 16	Hello, Can somebody help me gettig a geometry file of a centrifigal compressor readable on BladeGen with the possibility of making the diffuser rotate. Sincerly. E-mail : aas_srra@yahoo.fr

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rotating ZigZag Bed	Pugnax	CFX	8	March 8, 2015 17:16
ISSUES: Rotating VS Non-Rotaing Domains	gigiboumba	CFX	3	April 26, 2014 07:22
Rotating Impeller	Naith	FloEFD, FloWorks & FloTHERM	22	November 5, 2012 08:53
Vertical Axis Wind Turbine Rotating Domain Problems	TWaung	CFX	4	May 1, 2012 03:14
question about governing equation in CFX using rotating/non rotating reference frame	rystokes	CFX	0	January 12, 2010 06:14