|
[Sponsors] |
March 18, 2015, 07:17 |
fluid and solid mesh
|
#1 |
New Member
karthik
Join Date: Mar 2015
Posts: 1
Rep Power: 0 |
Dear All..can anyone suggest the procedure for solid and fluid meshing in ICEM ? I need to get the procedure to mesh solid and fluid in icem cfd. My geometry consists of solid flat test plate attached to the mainflow domain. I have query whether we need to create seperate body for both and create blocks to mesh or create a whole body for the total set up?
Last edited by karthikmk17; March 23, 2015 at 02:21. |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 08:38 |
[Workbench] how to define fluid volume even if mesh is produced on solid body? | viralnagar5692 | ANSYS Meshing & Geometry | 1 | January 12, 2015 07:08 |
[Commercial meshers] Create solid mesh around fluid mesh | wcpvandervelden | OpenFOAM Meshing & Mesh Conversion | 0 | June 21, 2012 11:05 |
conjugateHeatFoam: Should solid and fluid have the same mesh at the coupled boundary? | awacs | OpenFOAM Running, Solving & CFD | 6 | September 22, 2009 23:58 |
Differences between solid/ fluid mesh | Vidya Raja | FLUENT | 0 | March 14, 2006 18:49 |