[ICEM] fluid and solid mesh -- CFD Online Discussion Forums

March 18, 2015, 06:17	fluid and solid mesh	#1
karthikmk17 New Member karthik Join Date: Mar 2015 Posts: 1 Rep Power: 0	Dear All..can anyone suggest the procedure for solid and fluid meshing in ICEM ? I need to get the procedure to mesh solid and fluid in icem cfd. My geometry consists of solid flat test plate attached to the mainflow domain. I have query whether we need to create seperate body for both and create blocks to mesh or create a whole body for the total set up? Last edited by karthikmk17; March 23, 2015 at 01:21.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
[Workbench] how to define fluid volume even if mesh is produced on solid body?	viralnagar5692	ANSYS Meshing & Geometry	1	January 12, 2015 06:08
[Commercial meshers] Create solid mesh around fluid mesh	wcpvandervelden	OpenFOAM Meshing & Mesh Conversion	0	June 21, 2012 10:05
conjugateHeatFoam: Should solid and fluid have the same mesh at the coupled boundary?	awacs	OpenFOAM Running, Solving & CFD	6	September 22, 2009 22:58
Differences between solid/ fluid mesh	Vidya Raja	FLUENT	0	March 14, 2006 17:49

All times are GMT -4. The time now is 01:03.