please advise me in this mesh for spillway?
3 Attachment(s)
hi every one
:confused:i done mesh for spillway as shown follow,i used body sizine with element size=0.5 and inflation 2 faces shown (i only want extract results in spillway) with first layer height =0.1, maximum layer=60 unfortunately my result have high error with experimental data, I've analyzed model for 4 days , finally today finished and i countered with high error in compared results. could any one please give me advise. thanks in advance |
that looks like a poor mesh, what is the mesh quality, see the orthogonal quality n post that, use inflation on all walls, just to cover your boundary layer not like the one you have ATM
|
2 Attachment(s)
dear hwet thanks for suggestions, i doing your advise, i shown image of mesh orthogonality angle and flow over spillway, my flow have a wave as shown follow, whether this is from poor mesh?
thanks a lot dear hwet best regards |
this is not orthogonal quality, go to statistics it should be there, read some meshing tutorials by Ansys, google them
|
All times are GMT -4. The time now is 09:08. |