[ICEM] Mesh from a Part does not fit with Surface

sebebo · May 22, 2015, 04:57

Hi Forum,

i want to mesh a ring disk with interface surfaces. The mesh of one interface is not at the right place. The interface in question is the red one.

This is the Blocking for that geometry.

The following picture shows the mesh for the red interface.

I hope you can help me to get this mesh rigth.

Sincierly Sebastian<object style="width:0px; height:0px; display: hidden;" id="kpm_plugin" type="application/x-KPMPlugin"></object>

FJSJ · May 22, 2015, 09:11

Do you have that face as a single part? Try to project faces from block!

sebebo · May 22, 2015, 13:40

Yes the Surface is in a single Part. But i solved the problem with the Function Associate Face -> Surface.
Thanks for your Help

diamondx · May 22, 2015, 14:42

you just need to associate

May 22, 2015, 04:57	Mesh from a Part does not fit with Surface	#1
sebebo New Member Sebastian Bock Join Date: May 2015 Posts: 8 Rep Power: 10	Hi Forum, i want to mesh a ring disk with interface surfaces. The mesh of one interface is not at the right place. The interface in question is the red one. This is the Blocking for that geometry. The following picture shows the mesh for the red interface. I hope you can help me to get this mesh rigth. Sincierly Sebastian<object style="width:0px; height:0px; display: hidden;" id="kpm_plugin" type="application/x-KPMPlugin"></object>

May 22, 2015, 14:42		#4
diamondx Super Moderator Ghazlani M. Ali Join Date: May 2011 Location: Tokyo, Japan Posts: 1,385 Blog Entries: 23 Rep Power: 28	you just need to associate __________________ Regards, New to ICEM CFD, try this document --> https://goo.gl/KAOIwm Ali

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Number of cells in mesh don't match with size of cellLevel	colinB	OpenFOAM Meshing & Mesh Conversion	14	December 12, 2018 08:07
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
How to control Minximum mesh space?	hung	FLUENT	7	April 18, 2005 09:38

May 22, 2015, 09:11		#2
FJSJ Senior Member Javi Join Date: Jan 2013 Posts: 276 Rep Power: 16	Do you have that face as a single part? Try to project faces from block!

May 22, 2015, 13:40		#3
sebebo New Member Sebastian Bock Join Date: May 2015 Posts: 8 Rep Power: 10	Yes the Surface is in a single Part. But i solved the problem with the Function Associate Face -> Surface. Thanks for your Help