[GAMBIT] Face mesh

obaid69 · June 1, 2015, 01:51

Hello friends,
With reference to my older post http://www.cfd-online.com/Forums/ans...h-grading.html
I am having a problem with face mesh. I need to have hexa-mesh for volumes therefore I am using Quad/Submap for the faces.
Firstly I have split the edges and meshed edges separately then I did the face mesh. Finally I got an irregular face mesh, don't know why. I have attached the pics. Kindly help.
Link to pics: https://www.dropbox.com/sh/m6e92xrkf...rSiURzXKa?dl=0

-mAx- · June 1, 2015, 02:51

split your face like that:
Untitled.jpg

obaid69 · June 1, 2015, 07:35

Dear Perelli,
Thanks for the response. I will try in this way, but splitting in this manner will create extra edges on the face, will this effect my calculations?
Thanks again

-mAx- · June 1, 2015, 08:33

the edges will be treated as internal, no worry

obaid69 · June 1, 2015, 13:58

Ok i will try. Thanks

June 1, 2015, 01:51	Face mesh	#1
obaid69 New Member Obaid ur Rehman Join Date: Jul 2014 Location: Pakistan Posts: 10 Rep Power: 11	Hello friends, With reference to my older post http://www.cfd-online.com/Forums/ans...h-grading.html I am having a problem with face mesh. I need to have hexa-mesh for volumes therefore I am using Quad/Submap for the faces. Firstly I have split the edges and meshed edges separately then I did the face mesh. Finally I got an irregular face mesh, don't know why. I have attached the pics. Kindly help. Link to pics: https://www.dropbox.com/sh/m6e92xrkf...rSiURzXKa?dl=0

June 1, 2015, 02:51		#2
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	split your face like that: Untitled.jpg KaLium likes this. __________________ In memory of my friend Hervé: CFD engineer & freerider

June 1, 2015, 08:33		#4
-mAx- Super Moderator Maxime Perelli Join Date: Mar 2009 Location: Switzerland Posts: 3,297 Rep Power: 41	the edges will be treated as internal, no worry __________________ In memory of my friend Hervé: CFD engineer & freerider

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
[Other] dynamicTopoFVMesh and pointDisplacement	RandomUser	OpenFOAM Meshing & Mesh Conversion	6	April 26, 2018 07:30
[snappyHexMesh] How to define to right point for locationInMesh	Mirage12	OpenFOAM Meshing & Mesh Conversion	7	March 13, 2016 14:07
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
[blockMesh] BlockMesh FOAM warning	gaottino	OpenFOAM Meshing & Mesh Conversion	7	July 19, 2010 14:11

June 1, 2015, 07:35		#3
obaid69 New Member Obaid ur Rehman Join Date: Jul 2014 Location: Pakistan Posts: 10 Rep Power: 11	Dear Perelli, Thanks for the response. I will try in this way, but splitting in this manner will create extra edges on the face, will this effect my calculations? Thanks again

June 1, 2015, 13:58		#5
obaid69 New Member Obaid ur Rehman Join Date: Jul 2014 Location: Pakistan Posts: 10 Rep Power: 11	Ok i will try. Thanks