[ANSYS Meshing] ICEM CFX Primitive Regions Appearing after Smoothing

syble · June 11, 2015, 00:29

Hello,

I'm meshing a geometry of a nasal cavity in ICEM 16.0. The tetrahedral meshing algorithm I am using is the Robust(Octree) method. After meshing I am using the Smooth mesh globally function until the majority of the elements are no longer in the 0-0.3 quality bracket.

Upon bringing the mesh into CFX-pre I noticed that some of the parts I had specified in ICEM had gone from the "Principal 3D Regions - Body" entity (ie were missing from the Principal 2D Regions list when I expand the mesh drop-down tab) and were added to "Other 3D Regions". This part is labelled Box in the attachment.

Additionally several new Primitive 3D items (each with a set of Primitive 2D regions) have been added to the "Principal 3D Regions" entity.

I have noticed I do not get this problem if I do not Smooth the mesh in ICEM before exporting the mesh.

I'd like to know why this occurs and how I can stop it happening as well as what these "Primitive 3D" and "Primitive 2D" regions are.

Attached is an image of the mesh drop-down menu from CFX-pre.
Mesh.jpg

msoni24 · July 29, 2016, 16:29

Hi Syble,

Have you solved the issue of these primitives and the other 2d regions ?
I am also facing the same issue

Thanks and Regards,
Malav

June 11, 2015, 00:29	ICEM CFX Primitive Regions Appearing after Smoothing	#1
syble New Member Join Date: Jun 2015 Posts: 10 Rep Power: 10	Hello, I'm meshing a geometry of a nasal cavity in ICEM 16.0. The tetrahedral meshing algorithm I am using is the Robust(Octree) method. After meshing I am using the Smooth mesh globally function until the majority of the elements are no longer in the 0-0.3 quality bracket. Upon bringing the mesh into CFX-pre I noticed that some of the parts I had specified in ICEM had gone from the "Principal 3D Regions - Body" entity (ie were missing from the Principal 2D Regions list when I expand the mesh drop-down tab) and were added to "Other 3D Regions". This part is labelled Box in the attachment. Additionally several new Primitive 3D items (each with a set of Primitive 2D regions) have been added to the "Principal 3D Regions" entity. I have noticed I do not get this problem if I do not Smooth the mesh in ICEM before exporting the mesh. I'd like to know why this occurs and how I can stop it happening as well as what these "Primitive 3D" and "Primitive 2D" regions are. Attached is an image of the mesh drop-down menu from CFX-pre. Mesh.jpg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Problem with surface mapping using mesh from ICEM and CFX solution	eliass	ANSYS	0	April 14, 2015 04:24
ICEM of ANSYS V15: how to export .msh mesh for CFX	hydroaero	CFX	1	March 9, 2015 22:15
primitve 2D regions in CFX	shrimp	CFX	3	September 5, 2008 17:32
Icem Cfd To Cfx B.C. Problem	Kordou	CFX	4	July 17, 2008 12:49
importing mesh from ICEM CFD into CFX 5	Jay	CFX	2	November 12, 2002 13:46

July 29, 2016, 16:29		#2
msoni24 New Member Malav Join Date: May 2016 Posts: 1 Rep Power: 0	Hi Syble, Have you solved the issue of these primitives and the other 2d regions ? I am also facing the same issue Thanks and Regards, Malav