CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Annoying Issue with Mesher

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 17, 2015, 18:47
Default Annoying Issue with Mesher
  #1
Member
 
nm
Join Date: Mar 2013
Posts: 99
Rep Power: 11
nvarma is on a distinguished road
I have been working on a fairly complicated geometry for 2 weeks! I had meshed and saved the sizings/inflation, mapped faces, etc for critical zones.

Now finally towards 90% of the project, I ACCIDENTALY meshed a small plate with Patch Independent method and all the previous biases are gone and mapped meshes suppressed!

Delete the new method? Did that and yet the biases are still gone.

for a software that DOESN'T have an undo function one would expect some way to revert atleast a few steps?

close and open hoping that ansys didn't save the last few steps is not "undo".


How can such a software even be used by other industries?

Apologize for the rant, but thought this, is an issue.

Posting this just in case my anger is misplaced and I'm doing something wrong.
nvarma is offline   Reply With Quote

Old   June 17, 2015, 19:50
Default
  #2
Senior Member
 
Join Date: Apr 2014
Location: Melbourne
Posts: 584
Rep Power: 12
Kapi is on a distinguished road
Hi Nvarma,

In any software once you click generate or Build solution, the software takes into consideration that you have judged your input hence it saves your work and runs the code for you. You can not go back from a generated/built code.
May be preview mesh in your case will be a better option, not sure!

Dont worry, it happens with all of us!

Cheers
KAPI
Kapi is offline   Reply With Quote

Old   June 19, 2015, 18:11
Default
  #3
Member
 
nm
Join Date: Mar 2013
Posts: 99
Rep Power: 11
nvarma is on a distinguished road
hi Kapi,
I understand. However I have about 70 bodies-with solid and fluid parts. And I almost always use selective meshing with worksheet. The sad part is, I didn't even click the generate button, I just selected the patch independent method in the drop down.

I am forced to use tet meshes in fluid regions(or change the geometry!), which never happened in case of gambit.
nvarma is offline   Reply With Quote

Reply

Tags
issues, rant, workbench

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ANSYS Meshing] Weird issue: Solid names/even shape changing while exporting from Ansys DM to Mesher nvarma ANSYS Meshing & Geometry 2 May 22, 2015 10:06
[OpenFOAM] Annoying issue of automatic "Rescale to Data Range " with paraFoam/paraview 3.12 keepfit ParaView 60 September 18, 2013 04:23
Strange issue while launching ANSYS workbench in CentOS 6.4 Philip_C ANSYS 11 August 29, 2013 07:44
[ICEM] Annoying Issue in Icem 14.0 galap ANSYS Meshing & Geometry 2 May 22, 2012 17:50
Meshing related issue in Flow EFD appu FloEFD, FloWorks & FloTHERM 1 May 22, 2011 09:27


All times are GMT -4. The time now is 21:53.