CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Prism Mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 2, 2015, 02:15
Default Prism Mesh
  #1
New Member
 
Simm
Join Date: Nov 2012
Posts: 10
Rep Power: 13
kulls is on a distinguished road
i'm generating Prism Mesh using ICEM CFD v13 for different configurations of a complex geometry (fighter aircraft) from last 2 years.

Requirments:

Prism layers----------38
initial height----------0.01mm
growth ratio---------1.2
growth law-----------exponential

Advanced prism setting :

stair steps-----------------disabled
do not allow sticking-------enabled
do checks-----------------enabled

Few times only i got prism mesh with above requirements in first attempt.

Most of the time , i have to juggle with ortho weight and fillet ratio and after 5 or 6 attempts only , prism mesh with above requirements generates .

Its kind of trial and error to get prism mesh.

How to set the optimum parameters so that prism mesh generates in first attempt??

Any Help will be appreciated!!

thanks!!
__________________
Thanks!!
kulls is offline   Reply With Quote

Reply

Tags
icem cfd 13.0, prism mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Creation of hexa dominant mesh and prism layer gnuboard ANSYS Meshing & Geometry 7 January 11, 2018 05:13
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation tommymoose ANSYS Meshing & Geometry 48 April 15, 2013 05:24
[snappyHexMesh] Layers:problem with curvature giulio.topazio OpenFOAM Meshing & Mesh Conversion 10 August 22, 2012 10:03
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 22:28.