CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Generate Mesh on Internal walls

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 2, 2015, 22:11
Question Generate Mesh on Internal walls
  #1
Member
 
Vinícius da Costa Ávila
Join Date: Jul 2015
Location: Porto Alegre, Brazil
Posts: 62
Rep Power: 10
avila.vc is on a distinguished road
Hi,

Could anyone give me some advice here?
I have introduced internal parts in my geometry and I have created new parts to name them. However, when I visualize the pre-mesh and even after I export the mesh, these internal parts just vanish.

The external parts: walls, inlet and outlet are ok, but the internal ones (membrane, cilindres and baffle) weren't export with the mesh.

I have attached 3 prints,
screen1: my geometry (walls in green, inlet and outlet in red, baffle in pink and membrane and cilindres in blue)
screen2: the pre-mesh, where we can see that the mesh were generated on the inlet and walls.
screen3: unchecking the walls (with the pre-mesh checked) we can see no mesh on the internal parts, just on the inlet and outlet (in red).


Anyone has any idea what I have missed that the exported mesh doesnt carry the internal parts?

Thank you,
Vinícius
Attached Images
File Type: jpg screen1.jpg (25.1 KB, 19 views)
File Type: jpg screen2.jpg (20.8 KB, 18 views)
File Type: jpg screen3.jpg (21.4 KB, 16 views)
avila.vc is offline   Reply With Quote

Reply

Tags
blocking, internal baffle, internal parts, internal wall, mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Defining Interfaces and Splitting Internal Walls ICEM-FLUENT pmtgt ANSYS Meshing & Geometry 8 June 4, 2021 08:15
Star CCM Overset Mesh Error (Rotating Turbine) thezack Siemens 7 October 12, 2016 12:14
[ICEM] How to generate sunstructured "all-tri patch-dependant" surface mesh in ICEM? jash ANSYS Meshing & Geometry 19 July 23, 2013 19:48
[ICEM] Generate multiply bodies and then mesh them one by one hz283 ANSYS Meshing & Geometry 1 March 3, 2013 16:27
fluent add additional zones for the mesh file SSL FLUENT 2 January 26, 2008 12:55


All times are GMT -4. The time now is 02:32.