[ICEM] mesh in overlapped surfaces

svaezi · July 28, 2017, 02:00

Hi
I have recently worked on the model below, but I have problem in meshing part. I though you could help me about this. according to attached pictures I have some overlapped surfaces in my model, in which mesh does not form. despite I removed the underneath surfaces, I still have this problem. could you please help me to solve this problem??
thank you in advance

N-S · July 29, 2017, 02:00

the mesh will generate in watertight space, I thick your geometry have more than one watertight space. Maybe try assign each space a domain name by "Create body"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
y+ = 1 boundary layer mesh with snappyHexMesh	Arzed23	OpenFOAM Running, Solving & CFD	6	November 23, 2022 15:15
[snappyHexMesh] Disturbance in the mesh after the addition of layers	Dorian1504	OpenFOAM Meshing & Mesh Conversion	0	June 13, 2017 02:27
how to extend FSI 2D codes to 3D, need advises	abouziar	Main CFD Forum	1	May 30, 2008 04:08
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10

July 29, 2017, 02:00		#2
N-S New Member Andrew Join Date: Jul 2017 Posts: 4 Rep Power: 8	the mesh will generate in watertight space, I thick your geometry have more than one watertight space. Maybe try assign each space a domain name by "Create body"