CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ICEM] How To improve the orthogonality angle?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 11, 2015, 11:38
Default How To improve the orthogonality angle?
  #1
Senior Member
 
sluzzer
Join Date: Jul 2014
Posts: 118
Rep Power: 4
shivasluzz is on a distinguished road
Refinement improves aspect ratio... Like that what should be done to improve originality angle?
shivasluzz is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Remeshing and Minimum Orthogonality Angle ashtonJ CFX 2 May 7, 2015 19:11
Import netgen mesh to OpenFOAM hsieh Open Source Meshers: Gmsh, Netgen, CGNS, ... 32 September 13, 2011 05:50
Normal vector, slope and aspect angle g_niro Main CFD Forum 0 February 2, 2011 18:24
Orthogonality Angle Tristan CFX 2 December 2, 2008 13:11
Minimum Orthogonality Angle Farid CFX 1 June 20, 2008 12:51


All times are GMT -4. The time now is 01:21.