CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Problem with mesh and path (https://www.cfd-online.com/Forums/ansys-meshing/162778-problem-mesh-path.html)

Begin November 17, 2015 09:57

Problem with mesh and path
 
3 Attachment(s)
I use Ansys Workbench 16.2 to create geometry and to analyze it, but I generate mesh in ICEM.
I do following steps:
  1. setting: Multizone, Write ICEM CFD: Interactive to create mesh in ICEM
  2. delete ICEM blocking
  3. create my blocks and mesh

In Ansys I create a path along edge and sometimes I have strange path.
Wrong result (stress intensification) is where the path changes in direction.

If I don't clear ICEM blocking and I accept ICEM mesh, path is correctly calcuated.

Can someone help me?


All times are GMT -4. The time now is 04:28.