|
[Sponsors] |
December 25, 2015, 20:43 |
PZT & Al Model Issue
|
#1 |
New Member
Emin Cengiz
Join Date: Dec 2015
Posts: 1
Rep Power: 0 |
Hello. everybody.
I'm an mechanical engineering student. My ANSYS final project is about piezoelectric materials with aluminium plate. Model parameters except dimensions are piezoelectric material have to be on the aluminium plate and the model has 3D-shape. Modal and harmonic analysis are demanded. Is there anybody completed like this project? I defined as SOLID227 for PZT and SOLID185 for aluminium. I combined each other with BOOLEANS->GLUE and gave MESHING. Face voltages were given as 1V and 0V for PZT. Also I gave DAMPING RATIO and FREQUENCY RANGE values. I defined ANAYSIS TYPE, also. When I use SOLVE-> Current LS for the analysis solving, program directly close itself. I didn't solve this issue. I use ANSYS 12.0 |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
Error in Two phase (condensation) modeling | adilsyyed | CFX | 15 | June 24, 2015 19:42 |
Water subcooled boiling | Attesz | CFX | 7 | January 5, 2013 03:32 |
Issue with model reflection | orzel | ANSYS | 0 | November 13, 2011 16:02 |
multi fluid mixture model issue | rystokes | CFX | 3 | August 9, 2009 19:13 |