[Workbench] Rotated cylinder doesn't slice box

paja123 · January 4, 2016, 12:04

Hi all,
I am using Design modeler and I need to create box with cylinder inside with specific angle. I created a box (create-primitives-box) and cylinder (extruded from sketch and added by operation slice material), this works perfect - the material is sliced into two parts (box and cylinder). But once I use the rotation (body transformation - rotate), cylinder is rotated but the material is not sliced respectivelly it is sliced as i didnt use the rotation.
Does anyone know how I shoud do this?

Thanks!
Paja

Kapi · January 5, 2016, 23:34

post some pics!

paja123 · January 6, 2016, 07:38

There are pictures. I really don't understand why the box is not sliced by rotated cylinder.

hwet · January 13, 2016, 09:42

What do you want to achieve? Slice is used to divide the geometry into smaller parts.
If you want a cylinder inside your body you need to use the 'revolve' tool instead.

January 4, 2016, 12:04	Rotated cylinder doesn't slice box	#1
paja123 New Member Paja Join Date: Dec 2013 Posts: 8 Rep Power: 12	Hi all, I am using Design modeler and I need to create box with cylinder inside with specific angle. I created a box (create-primitives-box) and cylinder (extruded from sketch and added by operation slice material), this works perfect - the material is sliced into two parts (box and cylinder). But once I use the rotation (body transformation - rotate), cylinder is rotated but the material is not sliced respectivelly it is sliced as i didnt use the rotation. Does anyone know how I shoud do this? Thanks! Paja

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] Paraview slice type - cylinder?	acocic	ParaView	38	July 21, 2019 22:50
Drag force coefficient too high for a flow past a cylinder using komega sst	Scabbard	OpenFOAM Running, Solving & CFD	37	March 21, 2016 16:16
Forces Acting on a Rotating Cylinder (Moving Mesh)	dreamchaser	CFX	5	April 25, 2015 06:01
Creating thin slice out of a cylinder	lakhi	FLUENT	0	March 4, 2014 01:09
[blockMesh] Specifying boundary faces failes in blockMesh	blaise	OpenFOAM Meshing & Mesh Conversion	0	May 10, 2010 03:56

January 5, 2016, 23:34		#2
Kapi Senior Member Join Date: Apr 2014 Location: Melbourne Posts: 584 Rep Power: 14	post some pics!

January 13, 2016, 09:42		#4
hwet Senior Member Join Date: Mar 2014 Posts: 375 Rep Power: 13	What do you want to achieve? Slice is used to divide the geometry into smaller parts. If you want a cylinder inside your body you need to use the 'revolve' tool instead.