|
[Sponsors] |
[ANSYS Meshing] What is the relationship between the "min size" and "proximity min size" |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
January 24, 2016, 03:31 |
What is the relationship between the "min size" and "proximity min size"
|
#1 |
Member
wanghuo
Join Date: Aug 2014
Posts: 89
Rep Power: 11 |
hello friends!
If I choose the "use advanced size function-proximity and curvature".There are "min size" and "proximity min size".What is the relationship between the "min size" and "proximity min size"?Thank you very much! your sincerely hotboy! |
|
January 26, 2016, 17:14 |
|
#2 |
Senior Member
Join Date: Apr 2014
Location: Melbourne
Posts: 584
Rep Power: 13 |
hotboy,
from help section in Ansys: Proximity Min Size: "When Use Advanced Size Function is set to On: Proximity and Curvature, Proximity Min Size allows you to specify a global minimum size to be used in proximity size function calculations, in addition to specification of a global Min Size. By default, Proximity Min Size is set equal to the default of Min Size. You can accept the default or specify a value greater than 0." Go to help section in Ansys and search "Proximity Min Size" and "Proximity Size Function", it explains the relationship and what proximity is. Hope it helps Cheers KAPI |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|