CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[TurboGrid] No wall y+ option

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 24, 2016, 08:48
Default No wall y+ option
  #1
Member
 
Alex
Join Date: Feb 2016
Posts: 50
Rep Power: 2
Red Ember is on a distinguished road
I adjust Mesh Data > Passage
Sometimes there are 2 options for y+ value available: both hub boundary layer and shroud boundary layer, sometimes - only one.
Why it happens so?
Attached Images
File Type: jpg 1 opt.jpg (168.9 KB, 9 views)
File Type: jpg 2 opt.jpg (136.9 KB, 8 views)
Red Ember is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Low torque values on Screw Turbine Shaun Waters CFX 34 July 23, 2015 08:16
Setting the height of the stream in the free channel kevinmccartin CFX 10 July 9, 2015 21:36
Multiphase simulation of bubble rising Niru CFX 5 November 25, 2014 14:57
Concentric tube heat exchanger (Air-Water) Young CFX 5 October 6, 2008 23:17
Two-Phase Buoyant Flow Issue Miguel Baritto CFX 4 August 31, 2006 12:02


All times are GMT -4. The time now is 17:32.