CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Problem in creating Unite volumes (https://www.cfd-online.com/Forums/ansys-meshing/171733-problem-creating-unite-volumes.html)

aja1345 May 15, 2016 14:07
Problem in creating Unite volumes
 
HI,

I want to unite Volumes 134, 139, 124,135 and 164 in following model. But it doesn't work. Why?



Thanks

-mAx- May 17, 2016 03:10
134 + 139 = v1 ok from my side
124 + 135 = v2 ok from my side
v1 + v2 = v3 ok from my side
v3 + 164 ok from my side

So you need to unite them step by step

aja1345 May 19, 2016 08:23
Quote:
Originally Posted by -mAx- (Post 600315)
134 + 139 = v1 ok from my side
124 + 135 = v2 ok from my side
v1 + v2 = v3 ok from my side
v3 + 164 ok from my side

So you need to unite them step by step
Thanks...

But according to your method, i can't solve it! in fact, it doesn't work final step(v3 + 164 ok from my side)...please see the following picture...:

http://upsara.com/images/vzx_22222222.jpg

-mAx- May 20, 2016 04:27
try v3 + 164 with merge operation (real) instead of unite


All times are GMT -4. The time now is 14:24.