[ANSYS Meshing] no valid body found error

seyfigirgin · April 26, 2016, 08:30

Hi all

I hava a 2d sketch in solidworks 2015 and saved it as part1.sldprt

I run the workbench 2015 then from geometry i imported this file but when i generate it i came up with "no valid body" error.I selected the import geometry as 2d also from tools-options-geometry import but nothing changed.

I am using licensed products for both from university network.

Please help

villager · July 31, 2016, 18:50

[QUOTE=seyfigirgin;596760]
i came up with "no valid body" error.
/QUOTE]

Dear seyfigirgin!
Check this post:
http://www.cfd-online.com/Forums/ans...tml#post228887

1) Geometry - Advanced - Analysis Tyoe - 2D
2) your geometry should be in XY plane.
If you want to use axisymmetric featre of FLUENT, the geomtery should lay in +Y semiplane. X should be the axis of rotational symmetry.

April 26, 2016, 08:30	no valid body found error	#1
seyfigirgin New Member Seyfi Girgin Join Date: Aug 2015 Posts: 12 Rep Power: 10	Hi all I hava a 2d sketch in solidworks 2015 and saved it as part1.sldprt I run the workbench 2015 then from geometry i imported this file but when i generate it i came up with "no valid body" error.I selected the import geometry as 2d also from tools-options-geometry import but nothing changed. I am using licensed products for both from university network. Please help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Undeclared Identifier Errof UDF	SteveGoat	Fluent UDF and Scheme Programming	7	October 15, 2014 07:11
[snappyHexMesh] determining displacement for added points	CFDnewbie147	OpenFOAM Meshing & Mesh Conversion	1	October 22, 2013 09:53
How to install CGNS under windows xp?	lzgwhy	Main CFD Forum	1	January 11, 2011 18:44
OpenFOAM15 paraFoam bug	koen	OpenFOAM Bugs	19	June 30, 2009 10:46
DecomposePar links against liblamso0 with OpenMPI	jens_klostermann	OpenFOAM Bugs	11	June 28, 2007 17:51

July 31, 2016, 18:50		#2
villager Member vlg Join Date: Jul 2011 Location: My home :) Posts: 81 Rep Power: 17	[QUOTE=seyfigirgin;596760] i came up with "no valid body" error. /QUOTE] Dear seyfigirgin! Check this post: http://www.cfd-online.com/Forums/ans...tml#post228887 1) Geometry - Advanced - Analysis Tyoe - 2D 2) your geometry should be in XY plane. If you want to use axisymmetric featre of FLUENT, the geomtery should lay in +Y semiplane. X should be the axis of rotational symmetry.