|
[Sponsors] |
June 22, 2016, 14:29 |
UNIFORM MESH for Circle as inlet
|
#1 |
New Member
Join Date: Jan 2016
Posts: 2
Rep Power: 0 |
Hello,
can anybody tell me, how to creat a cuboid based on an uniform cartesian 3D mesh, which has an inlet, that don't follow the cells? On the picture you see my first try with icem and my target mesh from somebody else. |
|
June 22, 2016, 20:57 |
|
#3 |
New Member
Join Date: Jan 2016
Posts: 2
Rep Power: 0 |
Thank you for your advice,
i know how i get a blocking like on the picture, but i don't know how to associat the velocity_inlet boundary condition to the mesh like on the picture with the red inlet. The red inlet on the picture starts in the midle of a cell, not on the corners, like common boundary conditions. The picture below is how i made it allways, but the association of the red inlet is not like this. Its not the blocking i want to learn, its how to let start a velocity_inlet in the middle of many cells. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
LES supersonic free jet | martyn88 | OpenFOAM | 22 | April 17, 2015 06:00 |
Using a variable (increasing) inlet to get an easy convergence/initialization ? | fredo490 | OpenFOAM Running, Solving & CFD | 8 | April 9, 2014 09:35 |
[Commercial meshers] fluentMeshToFoam multidomain mesh conversion problem | Attesz | OpenFOAM Meshing & Mesh Conversion | 12 | May 2, 2013 10:52 |
T Junction Stability | ignacio | OpenFOAM Running, Solving & CFD | 5 | May 2, 2013 10:44 |
Pressure instability with rhoSimpleFoam | daniel_mills | OpenFOAM Running, Solving & CFD | 44 | February 17, 2011 17:08 |