[ANSYS Meshing] 3d wing hex mesh

visigot · August 23, 2016, 07:20

Hello everybody,

I try to generate a 3d wing mesh with ansys meshing. First I meshed the wing with tetrahedron methods according to cornell's tutorial but when I did mesh its orthogonal and skewness quality were bad. It was not in acceptable region especially trailing edge and wing tip. So I tried hex mesh using multizone method with inflation but i didn't achive mesh.

Could you help me how can I achive hex mesh for wing and which mesh strategy should I apply?

visigot · August 24, 2016, 02:02

Nobody can help?

August 23, 2016, 07:20	3d wing hex mesh	#1
visigot New Member bryan Join Date: Aug 2016 Posts: 2 Rep Power: 0	Hello everybody, I try to generate a 3d wing mesh with ansys meshing. First I meshed the wing with tetrahedron methods according to cornell's tutorial but when I did mesh its orthogonal and skewness quality were bad. It was not in acceptable region especially trailing edge and wing tip. So I tried hex mesh using multizone method with inflation but i didn't achive mesh. Could you help me how can I achive hex mesh for wing and which mesh strategy should I apply?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[OpenFOAM] ParaView shows bad cells, checkMesh doesn't seem to notice.	CoolHand	ParaView	2	August 21, 2014 15:58
Moving mesh	Niklas Wikstrom (Wikstrom)	OpenFOAM Running, Solving & CFD	122	June 15, 2014 06:20
3D Hybrid Mesh Errors	DarrenC	ANSYS Meshing & Geometry	11	August 5, 2013 06:42
[ANSYS Meshing] Creating Hex Boundary Layer Mesh and Unstructured everywhere else	NLao	ANSYS Meshing & Geometry	1	March 15, 2011 06:35
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09

August 24, 2016, 02:02		#2
visigot New Member bryan Join Date: Aug 2016 Posts: 2 Rep Power: 0	Nobody can help?