 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] Selecting multible faces at once |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 7, 2016, 09:20
|
Selecting multible faces at once
|
#1 |
|
New Member
Þórólfur Björn Einarss
Join Date: Sep 2016
Posts: 2
Rep Power: 0  |
Hi
I have a cylinder with multitude of very small cylinders protruding radially out of the cylinders wall (See figure). I want to select all the small cylinders' top surface in one go. Is that possible? Best regards Thorolfur |
|
|
|
|
|
September 7, 2016, 21:15
|
|
#2 |
|
Senior Member
Join Date: Apr 2014
Location: Melbourne
Posts: 584
Rep Power: 14 |
try to change axis and see if you can select all small from one side.
Otherwise its not possible unless you create script for it. I wouldnt personally create script for such small thing! |
|
|
|
|
|
|
| Tags |
| multible, namedselection, select, surface |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Decomposing meshes | Tobi | OpenFOAM Pre-Processing | 22 | February 24, 2023 09:23 |
| Foam::error::PrintStack | almir | OpenFOAM Running, Solving & CFD | 91 | December 21, 2022 04:50 |
| [snappyHexMesh] Error snappyhexmesh - Multiple outside loops | avinashjagdale | OpenFOAM Meshing & Mesh Conversion | 53 | March 8, 2019 09:42 |
| [snappyHexMesh] sHM layer process keeps getting killed | MBttR | OpenFOAM Meshing & Mesh Conversion | 4 | August 15, 2016 03:21 |
| snappyhexmesh remove blockmesh geometry | philipp1 | OpenFOAM Running, Solving & CFD | 2 | December 12, 2014 10:58 |
Linear Mode
