|
problem with meshing 2d airfoil
5 Attachment(s)
When I mesh a domain of 2D airfoil, some errors occurs.
I set the unit to "meter", and the chord length of the airfoil is 1m. Then I set the maximum size of the wall of airfoil to 0.0001m. But the airfoil was ignored. When I set the maximum size of the wall of airfoil to 0.001m, it was meshed correctly. Why did this happened? I couldn't find the reason now. Thanks for anyone who can help me with this problem, thank you:)Attachment 51347 Attachment 51348 Attachment 51349 Attachment 51350 Attachment 51351 |
If i were you I would do blocked structured mesh rather than this approach
|
As Shereez said you'll be way more efficient using a blocking strategy. This is well documented, you can even find a nice tutorial that Simon made some time ago : https://www.youtube.com/watch?v=tYrbScUH9RE
|
| All times are GMT -4. The time now is 17:38. |