CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] ICEM CFD- Two Blocks with non aligned grid lines

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 28, 2016, 17:12
Default ICEM CFD- Two Blocks with non aligned grid lines
  #1
Member
 
Join Date: Apr 2016
Posts: 34
Rep Power: 7
Eman. is on a distinguished road
Hi,

I have a Geometry (here) and I want to use different mesh for the cylinder and the square block such that at their interface the grid lines of each block do not match with each other. (Later, when I am solving it I will interpolate between these non-matching grid lines). I've been trying to do so using blocking in ICEM CFD but it seems like there must be a smooth transition between each block and the grid lines must match. Is it possible to create this kind of mesh with two separate blocks with non-aligned gridlines at their interface?

Thanks
Eman. is offline   Reply With Quote

Reply

Tags
ansys, icem cfd, mesh, non conformal mesh

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[TurboGrid] turbogrid to icem cfd then icem cfd to fluent tmeysam92 ANSYS Meshing & Geometry 0 May 7, 2014 06:25
[ICEM] Unstructured meshing of a grid fin in ICEM CFD ToORAGe ANSYS Meshing & Geometry 4 January 27, 2014 10:34
Learn ANSYS ICEM CFD easy_astronaut ANSYS 2 December 15, 2013 15:34
ICEM CFD 5.1 Hex-Tet mesh merging failure bogesz CFX 1 January 29, 2005 06:46
ICEM CFD Modules Boris FLUENT 1 March 12, 2004 14:37


All times are GMT -4. The time now is 03:24.