CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (https://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Allowable geometry limits for student version (https://www.cfd-online.com/Forums/ansys-meshing/182407-allowable-geometry-limits-student-version.html)

ram singh January 9, 2017 10:17

Allowable geometry limits for student version
 
I want to import a geometry having 89 bodies and it has 0.5 m length. When I try to import that geometry in designmodeler, an error message shows-" you have exceeded the allowable geometry for ansys academic. you can not save or export"."Turning Large model support on" is not helping. I tried to know the limitations for designmodeler but could not get that. Please help me.

Flyingsmiley May 19, 2017 09:27

You can import a maximum of 50 bodies
 
I just stumbled upon the same problem and as I had a body count quite close I just tried a little. I suppose you can import a maximum of 50 bodies with the student license. This threshold, x, is measured accurate to 50<=x<52 so you might try 51 but I think this is unlikely.


All times are GMT -4. The time now is 19:20.