CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] spaceclaim CFD meshing zone interface setting

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 26, 2017, 18:23
Default spaceclaim CFD meshing zone interface setting
  #1
New Member
 
Yizhou Yan
Join Date: Jan 2017
Posts: 1
Rep Power: 0
yzhyan is on a distinguished road
I am trying to create multiple cell zones so that I can have different porosity in each zone. This is a 3-D asymmetric model, and I generated the mesh using Spaceclaim and Meshing tools. Right now, I can get several zones, but how do I set the interface between the zones in Spaceclaim or Meshing. The zones should be in a continuous flow domain. Thank you in advance.
yzhyan is offline   Reply With Quote

Old   October 12, 2018, 07:00
Smile spaceclaim CFD meshing zone interface setting_share topology
  #2
New Member
 
Pratik
Join Date: Jun 2017
Posts: 2
Rep Power: 0
J_Pratik is on a distinguished road
@yzhyan, while modeling in the spaceclaim, you have to select all the required bodies for your analysis from tree structure. After that, create a new component with right mouse click. Go to properties of newly created component using right click. In Shared Topology option Select type from none to share. Using this, you can get conformal mesh between multiple volumes.
J_Pratik is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Radiation in semi-transparent media with surface-to-surface model? mpeppels CFX 11 August 22, 2019 08:30
My radial inflow turbine Abo Anas CFX 27 May 11, 2018 02:44
[ICEM] ICEM CFD Interface meshing problem gamemakerh ANSYS Meshing & Geometry 1 December 12, 2016 04:41
[snappyHexMesh] determining displacement for added points CFDnewbie147 OpenFOAM Meshing & Mesh Conversion 1 October 22, 2013 10:53
Problem in IMPORT of ICEM input file in FLUENT csvirume FLUENT 2 September 9, 2009 02:08


All times are GMT -4. The time now is 14:14.