[ANSYS Meshing] Problem with creating Infaltion (Only Edge Selection)

Towe91 · March 9, 2017, 16:16

Hey Everyone!

I have a problem with creating Inflations in Ansys 17.2.
I created a heat exchanger and it worked perfectly but now I have the same type of Geometry and I changed basically the scale of the geometry and now I cannot create an inflation because when I insert it and I want to choose my Named Selection in the drop down it wont let me. And if I want to do it with geometry instead I can only select Edges...

I am really stuck in this problem and I hope somebody can help me!

Thanks!

vasava · March 13, 2017, 07:52

Can you post some pictures about your problem?

March 9, 2017, 16:16	Problem with creating Infaltion (Only Edge Selection)	#1
Towe91 New Member Join Date: Mar 2017 Posts: 4 Rep Power: 9	Hey Everyone! I have a problem with creating Inflations in Ansys 17.2. I created a heat exchanger and it worked perfectly but now I have the same type of Geometry and I changed basically the scale of the geometry and now I cannot create an inflation because when I insert it and I want to choose my Named Selection in the drop down it wont let me. And if I want to do it with geometry instead I can only select Edges... I am really stuck in this problem and I hope somebody can help me! Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] Mesh conversion problem (fluent3DMeshToFoam)	Aadhavan	OpenFOAM Meshing & Mesh Conversion	2	March 8, 2018 01:47
Problem with creating the 2D base template in es-ice 4.18	Keving	STAR-CD	0	February 9, 2016 08:34
[ICEM] Problem in creating different zones in ICEM-CFD	samurai_01	ANSYS Meshing & Geometry	2	November 28, 2012 12:41
Where's the singularity/mesh flaw?	audrich	FLUENT	3	August 4, 2009 01:07
fluent add additional zones for the mesh file	SSL	FLUENT	2	January 26, 2008 11:55

March 13, 2017, 07:52		#2
vasava Senior Member Paritosh Vasava Join Date: Oct 2012 Location: Lappeenranta, Finland Posts: 732 Rep Power: 22	Can you post some pictures about your problem?