CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] How to specify b.c on all edges & faces of fan?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By bluebase

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 19, 2017, 06:05
Default How to specify b.c on all edges & faces of fan?
  #1
New Member
 
PRASHANT SRIVASTAVA
Join Date: Mar 2017
Posts: 3
Rep Power: 9
PRASHANT_SRIVASTAVA is on a distinguished road
I HAVE A PROJECT IN ELECTIVE C.F.D COURSE WHERE I AM TRYING TO DO C.F.D ANALYSIS OF RADIATOR FAN. I need some guidance on which parts should be associated(vertex,vertices) ogrid, meshing. please help
Attached Images
File Type: png Capture.PNG (71.7 KB, 3 views)

Last edited by PRASHANT_SRIVASTAVA; March 19, 2017 at 06:06. Reason: not added tags
PRASHANT_SRIVASTAVA is offline   Reply With Quote

Old   March 20, 2017, 05:05
Default
  #2
Senior Member
 
Sebastian Engel
Join Date: Jun 2011
Location: Germany
Posts: 566
Rep Power: 20
bluebase will become famous soon enough
Hello Prashant,

it's always a good idea to start with doing the tutorials of ICEM.

A good start for this section of the forum is reading the sticky post: Before you start a thread, see if you can find answers here

Here you will find some valuable links regarding ICEM and how to ask questions here. Don't skip "Simons tips and tricks".

With regards,
Sebastian
bluebase is offline   Reply With Quote

Old   March 20, 2017, 09:33
Default
  #3
New Member
 
PRASHANT SRIVASTAVA
Join Date: Mar 2017
Posts: 3
Rep Power: 9
PRASHANT_SRIVASTAVA is on a distinguished road
Thank you, i will look into it, i am a newbie here.
PRASHANT_SRIVASTAVA is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Can't Shake Erros: patch type 'patch' not constraint type 'empty' BrendaEM OpenFOAM Meshing & Mesh Conversion 12 April 3, 2022 19:32
Compressor Simulation using rhoPimpleDyMFoam Jetfire OpenFOAM Running, Solving & CFD 107 December 9, 2014 14:38
foam-extend_3.1 decompose and pyfoam warning shipman OpenFOAM 3 July 24, 2014 09:14
AMI interDyMFoam for mixer danny123 OpenFOAM Running, Solving & CFD 4 June 19, 2013 05:49
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 02:27.