CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Boundary condition invisible in CFX

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 4, 2017, 05:14
Default Boundary condition invisible in CFX
  #1
Member
 
Jan Surwiło
Join Date: Feb 2017
Posts: 31
Rep Power: 9
johny0688 is on a distinguished road
Hello everyone!
I have problem with ICEM which I have never seen before. I did a simple mesh of turbine blade using tetra/prism. Geometry contains different parts e.g. blade, inlet, shroud etc and one inner body FLUID. When I turn off part in tree the shell mesh hides properly. Checking mesh, no problems. All seams to be perfect. But after reading mesh in CFX there is only one BC region called FLUID 2 so I can't set any boundary. The problem is the same in Workbench as well as in ICEM standalone. I tried *.cfx5 and *.msh mesh format but there is no difference. When I export the mesh in CGNS format all BC are visible in CFX but with slightly different names (no problem for me). I tried different ANSYS version 17.2, 17.1, even 16 and problem always occurred. As the mesh works with CGNS I think the problem may be with come ICEM internal file or maybe some error with ICEM boco file reads.
Id anyone had faced up similar problem and now the solution please share.
Thanks,
Best for all,
Johny
johny0688 is offline   Reply With Quote

Old   April 9, 2017, 09:00
Default
  #2
Far
Super Moderator
 
Sijal
Join Date: Mar 2009
Location: Islamabad
Posts: 4,553
Blog Entries: 6
Rep Power: 54
Far has a spectacular aura aboutFar has a spectacular aura about
Send a message via Skype™ to Far
you have create the parts from the boundaries which are there in CFX pre if you have defined them in ICEMCFD.
Far is offline   Reply With Quote

Old   April 10, 2017, 02:31
Default
  #3
Member
 
Jan Surwiło
Join Date: Feb 2017
Posts: 31
Rep Power: 9
johny0688 is on a distinguished road
I have never problem with this. So far I used blocking for meshing, created parts from surface boundary and it worked fine in CFX. But this time I wanted to computed tetra mesh, I created all boundary, the same like in blocking and it didn't work. There wasn't any boundary in CFX. As I said, when I export mesh in CGNS boundary has worked. So I guess it isn't problem with boundary created in ICEM but something with exporting.
johny0688 is offline   Reply With Quote

Reply

Tags
boundary condition, cfx, cgns, mesh export

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
sliding mesh problem in CFX Saima CFX 46 September 11, 2021 08:38
several fields modified by single boundary condition schröder OpenFOAM Programming & Development 3 April 21, 2015 06:09
An error has occurred in cfx5solve: volo87 CFX 5 June 14, 2013 18:44
vorticity boundary condition bearcharge Main CFD Forum 0 May 14, 2010 12:32
RPM in Wind Turbine Pankaj CFX 9 November 23, 2009 05:05


All times are GMT -4. The time now is 22:21.